Timber sash and case windows grace many a property. With time, however, these distinctive windows will require a little extra care and attention.
Sash cords snap and draught seals wear out while bottom rails gradually rot through years of neglect. The window rattles first, then jams, then simply refuses to close properly!
Woodfellas are experienced specialists in timber sash and case windows, serving Scottish homes throughout Clarkston from our workshop for over two decades.
We restore, and manufacture bespoke replacements when a window is beyond saving.
Ring us on 07920 057592 or contact us via our contact page to book a free visit and written quote.
What is a timber sash and case window
The heading accurately reflects how the system operates.
The sash refers to the movable glass panel, whilst the case is the hollow timber frame that is built within the wall around the window opening.
Inside every case sit two weights, one serving the upper sash and one supporting the lower. These hang from sash cords that run over pulley wheels positioned at the top of the frame.
Lift the lower sash and the weights drop down on the opposite side. Release it and they hold the sash perfectly in place!
Whilst casement windows swing outward on hinges, sash and case windows work by sliding vertically.
Both sashes move independently, giving you the ability to open from the top, the bottom, or both at once. You enjoy brilliant ventilation control throughout your home, and with no panel swinging into the room or out towards the street, it is as practical as it is smart!
When the system is functioning correctly, you hardly give it a second thought.
When the cords break, as they often do after years of use, the sash falls and remains stuck or becomes tricky to operate.
That is precisely where Woodfellas steps up.
Timber sash window services and refurbishment
Not every traditional sash window requires an exact approach.
Our sash windows team in Clarkston takes the time to grasp the precise requirements of your windows before advising whether repair or full refurbishment is the most suitable course of action for you.
Window draught-proofing
A full window overhaul is the smart move when the existing frame is structurally solid yet simply not delivering the goods!
Our experienced craftsmen apply joinery methods specifically suited to traditional windows, improving your glazing and fitting draught-proofing throughout your home.
A refurbished sash and case window in your Clarkston property ought to feel as though it was always perfectly as it should be.
Every installation we undertake is driven by the goal of effortless operation, silent installation work and a inviting warmth within the room.
Sash cord and weight replacement
Sash cord replacement is the most commonly carried out repair in our repertoire.
When the cords break, the weights remain resting uselessly inside the casing with nothing to connect them to the sash.
We reach the pocket piece, remove the existing weights, install fresh sash cords, and position the pulleys precisely.
Our team will always inspect the full condition of the window while on site, ensuring nothing goes unnoticed.
Timber repairs
Bottom rails and sills take the full force of Clarkston’s severe weather conditions.
Where rot is confined to part of the rail, we remove the damaged timber and insert new sections using matched traditional timber. The repair integrates seamlessly with the surrounding wood, leaving the rest of the original window fully intact.
We are firmly of the opinion that a window which stays fundamentally intact should not be sacrificed simply because one section of it has developed fault.
Supplying and fitting bespoke sash windows
When a window has reached the point where repair is no longer a sound investment, we make brand new sash windows to your precise specifications within our workshop, then supply and install them directly at your premises.
Every single replacement window is carefully crafted and made to measure in either hardwood or treated pine. We make serious effort to match the profile, proportions and glazing bar pattern of your original windows!
As timber window manufacturers proudly based in Clarkston, we provide and fit brand new sash and case windows across the region, combining high quality materials with traditional heritage techniques!
Our range of sash and case windows encompasses everything from a single replacement sash through to a complete set of new windows for a listed building.
Double glazing and enhanced security hardware are included as standard.
Double glazed sash windows in Clarkston
Enhance your home and everyday living experience with beautiful double glazed sash and case windows!
Our units have a slim-profile sealed design that fits neatly within the original glazing rebate, leaving the sash profile and glazing bar pattern completely unchanged.
From the exterior, the timber window appears identical to the original.
Here is the explanation why property owners across Clarkston are choosing to upgrade their traditional sash and case windows with double glazing.
Energy efficiency
Our glazing service delivers a substantial improvement to your home’s energy efficiency.
This translates directly into lower energy bills, as your heating system has to work far less to keep a comfortable temperature across your home.
Noise reduction
Reducing sound is another advantage homeowners notice quickly.
Double glazed sash windows substantially minimise noise transmission for homes along busy roads or near main junctions.
Sash and case windows in Scotland’s conservation areas and listed buildings
Scotland’s architecture is stunning, rich in a rich history.
The character of a building holds stories worth preserving, and sash and case windows are woven deeply into that living narrative. Trust Woodfellas to honour that story through expert timber window restoration.
Should your property sit within one of these designated areas, or indeed have listed building status, the regulations governing window replacement are detailed and hold significant weight prior to commissioning any works.
We have been working on properties located within conservation areas for more than twenty years.
We understand precisely what the council needs, how to move through the consent process with assurance, and how to restore or replace windows in a manner that satisfies every requirement without needless delays or repeated correspondence.
For a team whose expertise in listed buildings and conservation area projects is equalled only by their deep knowledge of the windows themselves, reach out today to arrange a complimentary site visit and written quotation.
Sash and case window faults we fix in Clarkston
The sash is failing to remain in the raised position and drops back down.
Replacing broken sash cords is the most common sash and case repair we undertake, and on an otherwise intact window it is a simple task for our professional team.
Draughts and rattling
The draught seal between the sash and the frame has degraded or was never installed in the initial place. A sash and case window that admits draughts will also often rattle in the wind due to that very same gap.
Including draught-proofing within a planned service appointment addresses all concerns thoroughly and at the same time.
Rotten bottom rail
The bottom rail of the lower sash is the most vulnerable part of a sash and case window.
Where the decay is restricted to a particular section of the rail, the affected timber is gently taken out and substituted by new sections, joined smoothly using closely matched material.
The rest of the original window remains entirely undisturbed.
Window stuck shut by paint
Years and years of paint layered onto the sash to protect it from Scotland’s persistent wet weather can end up sealing it firmly to the frame!
We release the sash from its binding, thoroughly clean every surface, refine the fit required, and return the mechanism to smooth and proper working order once again.
The cords and pulleys are thoroughly inspected during the work, sparing you from dealing with numerous repair jobs down the line.
Single glazing
Original single-glazed panes lose heat rapidly and permit street noise to filter straight through. We upgrade to double glazing while keeping unchanged the visible profile of your window in any way!
Sash and case windows Clarkston FAQs
Is it better to refurbish sash and case windows or replace them?
Whether renovation or replacement is the appropriate course of action depends entirely upon the existing condition of the window itself. Where the box frame remains structurally sound and the sashes retain their integrity, refurbishment represents a wholly sensible and rewarding decision, allowing the window to perform with renewed efficiency whilst preserving its original character. However, where the frame has suffered significant deterioration or the timber has decayed beyond the point of viable repair, replacement becomes the more practical and appropriate course of action.
Can sash and case windows take double glazing?
Yes. We utilise slim profile sealed units that sit neatly within the existing glazing rebate, requiring no alteration to the sash width or glazing bar arrangement. Viewed from the exterior, the window keeps the appearance of the original.
Get a free quote for sash and case windows in Clarkston
Whatever your sash window needs may be in Clarkston, whether repair, restoring, or full replacement, Woodfellas is fully equipped to help.
Give our friendly team a ring today and we will help you determine the very best option for every window in your home. Every quote we supply is free of charge, provided in writing, and carries absolutely no obligation whatsoever. Should you choose to move forward, we will arrange everything around your schedule.
Every window is crafted within our own workshop using time-honoured methods and fitted by our own joiners throughout Scotland.
Reach out to us today by phoning 07920 057592 or by filling in the form on our contact page, and we will respond to you within 24 hours.